Bowl FeedersBowl Feeders are vibratory feeders that consist of a feeder bowl with a spiral track inside of the bowl. As the drive unit produces vibrations, the feeder bowl vibrates, moving the parts up the track. The drive unit, equipped with a variable-amplitude controller, vibrates the bowl feeder, forcing the parts to move up a circular, inclined track. The track is designed to sort and orient the parts in consistent, repeatable positions, according to certain requirements. The length, width and depth of bed of the bowl feeder can be adjusted, and special bed liners can be installed if the material to be handled is abrasive. Dust-proof outlet covers can be attached to the inlet and discharge to reduce dusting caused by dusty material or a completely enclosed tube feeder can be specified. Bowl feeders can also be manufactured from stainless steel to meet sanitary requirements in food processing. Bowl feeders are utilized in the pharmaceutical, automotive, chemical and mining industries. Other industries include steel, glass, foundry, concrete, recycling, bakery, railroad unloading and plastics. |
|
BOWL FEEDER |
||||
|
SMALL BOWL Aluminium machining bowl and jig excapement SPECIALLY OFOR SEMICONDUCTOR PRODUCTS SUCH AS SOT 23 PRECISION IC CHIP. |
||||
|
LINEAR FEEDER THE LINEAR FEEDER ARE A USEFUL ADDITION TO THE BOWL FEEDERS. THE TRANSFER OF ORIENTED PARTS IS NO LONGER DEPENDENT ON A GRAVITY TRACK AS THE LINEAR FEEDER PROVIDES THE VIBRATING FORCE ASSURING CONTINUOUS FLOW OVER A HORIZONTAL DISTANCES. THEY ALSO CREATE BUFFER STORAGE OF IRREGULAR ORIENTED COMPONENTS AND ASSIST IN KEEPING YOUR PRODUCTION FLOWING. |
||||
|
HOPPER FEEDER FEED HOPPER ARE RECOMMENDED TO ACCOMPLISH TWO PURPOSES. FIRST, TO PROVIDE AMPLE STORAGE OF PARTS AND TO REDUCE FREQUENT MANUAL LOADING. SECOND, TO CONTAIN PARTS TO ELIMINATE UNDERFEEDING AND PREVENT OVER-FEEDING SO THAT PARTS DO NOT INTERFERE WITH THE ORIENTING OPERATIONS WITHIN THE BOWL. |
||||
|
CONTROLLER FEED CONTROLLER MAY BE USED WITH ALL FEED BOWL AND LINEAR FEEDER. MAIN VOLTAGE IS NORMALLY 220V; 50 OR 60 CYCLES. THESE CONTROLLERS ARE AVAILABLE ALSO FOR 110V MAINS SUPPLY - SINGLE PHASE. |
||||
|
SOUND ENCLOSURE CAPABLE OF REDUCING NOISE LEVELS OF PARTS FEEDERS, ARE AVAILABLE EITHER IN SINGLE OR TWIN BOWL SIZES. NOISE LEVELS NI VIBRATORY PARTS FEEDERS WILL BE REDUCED TO AS MUCH AS 25 DECIBELS. |
||||
|
URETHANE COATING REDUCE NOISE AND ANTI OIL. REDUCE FRICTION BETWEEN COMPONENT & BOWL SURFACE. |
||||
 |
FULL 5-AXIS SIMULTANEOUS MOTION SIMPLIFIES MACHINING OF COMPLEX PARTS. | ||||
|
|||||
